Site Loader

Toe Caps Essay, Research Paper

Vernon Karst

English 101

Illustration

Due March 14, 2000

TOE CAP USE IN INDUSTRY IS UNSAFE

Toe caps hinder more than aid when worn as industrial personal protective equipment. These cup-like screens designed to have on over frock places are made of difficult reinforced plastic and/or steel. They were heedlessly adopted as a? speedy hole? to pick protection in response to the July 5, 1994? OSHA 1910.136 Foot Protection? opinion. This standard provinces that all jeopardies in the workplace must be identified. Employees and visitants must have on appropriate personal protective equipment to protect against these jeopardies.

A misunderstood construct continues to boom throughout industry advancing the false belief that because toe caps cover toes the same as safety places, they provide the same degree of protection. This is non true. They are unstable, painful and make as many jeopardies as they are supposed to protect.

If the cap tantrum is loose, switching from side to side, safety and protection is badly compromised. A female seller sing the care section was asked to have on toe caps. Even after taking the smallest toe caps available, the seller had trouble maintaining the caps in topographic point on the forepart of her size-six places. She managed a few unsteady stairss before the cap on her right shoe swung left doing her to trip over her ain pes. The scene was reminiscent of a little kid have oning his or her female parent? s over-sized high heels. Yes, it is possible to walk, but the whole experience is unsteady and insecure.

Protective footwear must allow unencumbered motion in the tungsten

ork environment. On-site contractors work in assorted environments necessitating multiple physical challenges including mounting up and down steep stairss and ladders. Most frequently, the largest of toe caps are excessively little on an mean contractor? s places. Not merely is the fit really uncomfortable, but the caps pinch the tip of their places, and widen perilously out in a Bozo-the-Clown? reversal? manner. This really hapless terms makes it unsafe to finish even the simplest of mundane maps.

The National Safety Council wrote in their? Foot Protection? booklet that in order for pes protection to work decently, it must be the right size for your pes and non ache. Recently, executives visited the Owings Mills site and requested a circuit of the fabrication installation. They were given cosmopolitan suiting toe caps to have on. After a few proceedingss, the executives suddenly ended the circuit saying the caps were non merely destroying their places, but besides cutting into the tops of their pess.

Even OSHA agrees it is unforgiving and illegal to have on personal protective equipment that creates jeopardies every bit unsafe as those it was designed to extinguish. Ill-fitting toe caps create a battalion of stumbling jeopardies. The stumbling jeopardy in itself becomes the greater hazard when weighed against the odds of a falling object hitting the toes in the exact topographic point where the toe cap remainders. Furthermore, steel-toed caps may make flickers by hitting metal against metal or concrete. Flickers are unsafe when working about flammable natural stuffs frequently found throughout industry. Remember, the existent ground for utilizing protective footwear is to supply protection against acquiring injury, non merely to fulfill an OSHA opinion.

Post Author: admin